2976 Oakwood Avenue

Local assessors in Lynwood, CA have categorized 2976 Oakwood Avenue as a residential type of property. The home was built in 1953 and is 71 years old. The property's lot size has been calculated to be 6,501 square feet. The linear feet between the front and back of the lot was measured at 1,300 ft and the front of the lot was measured at 500 ft. Sharp-eyed aficionados of architecture will notice that the home on the property was built in a conventional style. Now, let's dive a bit deeper into the details surrounding the home on the property. There are 6 rooms in the home. Of these, 3 have been legally categorized as bedrooms. For more details, please view your local government regulations on what counts as a legal bedroom. As for the restroom situation, there is one full bathroom. There is also a partial bathroom. This is a single story home so it's perfect for folks who don't want to have to climb stairs on a daily basis. If we look only at the heated or air conditioned part of the building, then 2976 Oakwood Avenue has a total of 1,152 sqft of living area. Note that this number does not include the square footage of the garage, basement, and/or porch into its calculations.

Curious to learn more about the home? Our team of data engineers have sourced the most up-to-date information from the local assessors office to share with you. The home sources its water from a municipal system. There is only one available parking space, so if you need more, you may need to find some alternatives. It might sound scary but did you know that buildings can move depending on the weather? Both hot and cold weather can have severe impact on the longevity of your home structure depending on how much your home moves. Hence why architects pay a lot of attention to the type of control joints used in the construction process. Just so you know, this home was built with wood control joints. Not only do we know the type, but we also know that the assessors have graded the quality of these control joints with a letter grade - C. The building has a hip style roof that was made of composition shingle. Lots of stucco were used in the construction of the exterior walls of the home. The home's floor/wall heating system is the primary heating source. The property was last sold in Jan 6, 2020 for $460,000. That's $399.31 per sqft. Prior to that sales transaction, the property was also sold in Apr 4, 2018 for $430,000. 2976 Oakwood Avenue was last assessed in 2023. The total value of the property was assessed at $483,539. Specifically, the land the property is located on was valued at $370,644. While improvements on the property were assessed at a total of $112,895. The total assessed value for this property is more than the total market value as of this moment. Which is pretty atypical. The total amount of taxes due from a property owner is $6,847. Are you already in the process of closing on a property and have signed a purchase agreement? You may want to consider locking in your current mortgage rate if interest rates have been rising or seem volatile. This is what's known in the market as a mortgage rate lock (aka rate protection). However, be sure to evaluate your situation carefully before you do so. There may be certain costs associated with taking this action and you'll want to time the start of your perfectly! Unfortunately, this property is not currently listed for sale but our inventory of available properties is constantly updating in real time. Check back frequently for updates.